Having trouble placing or receiving calls or using your voicemail system on Ooma Telo VoIP Phones? Post your questions here.
#76784 by ThresherJim
Tue Mar 08, 2011 2:49 pm
I have a problem Dialing My Area Code.
I can dial other area codes no problem and calls go through.
but when i dial a number in my area code i get a voice recording saying "Please Dial Area Code and Number".
Here's how it goes I dial number then press talk on phone get ooma dial tone, can hear number tones being dialed then get blank air for a couple of seconds then the pre-recorded "Please dial area code and number".
Now I have tried this just by dialing the 7 digit number, the area code + 7 digit number and the 1+area code+7 digit number and have gotten the same results every time.
I am trying to dial the 951 area code. has anyone gone thru this dillemma?

please let me know what i can do. i have been trying to make appointments and cannot get through.

thank you,

one other thing i have the 10 digit dialing checked in the settings.
#76786 by thunderbird
Tue Mar 08, 2011 3:05 pm
Something to try:
Try dialing *98 for Telo or *99 for Hub before the numbe to be dialed, and see if that works?

For a longer term fix contact:

Customer Support
Email: support@oomacare.com
Phone: 1-888-711-OOMA (6662)
Monday-Friday 7am-7pm PST
Saturday-Sunday 8am-5pm PST
#76789 by lbmofo
Tue Mar 08, 2011 3:54 pm
Sounds like your landline phone package is feature rich? If you have call forwarding, why not consider changing your Ooma setup to run on standalone (get a number assigned by Ooma) and have your landline calls forwarded to your temp Ooma number? Only draw back there is that your outgoing calls (via phones connected to Ooma) will reflect your Ooma temp number. This way, you can really test drive your Ooma. To change the config, you'd need to call Ooma customer service at 1-888-711-OOMA.
#76790 by ntoy
Tue Mar 08, 2011 3:58 pm
Yes, as lbmofo mentioned, you can call into support & they can change you to a temp number. It would take a few minutes & a reboot of your Ooma afterwards. This would not impact your porting if it is already in progress.

Who is online

Users browsing this forum: No registered users and 10 guests