Got something else to discuss that is not covered by the previous forums? Post it here!
- Posts: 4
- Joined: Mon Feb 25, 2013 9:13 pm
I have 2 phone numbers on my Ooma. The Premier option for caller ID blocking on outbound calls seems to apply to both numbers so I want to unblock my caller ID for some/all of the people in my Contacts list. Is there an option to do this or can I just insert the relevant star codes before the phone number in each of the entries of my Contact list (and if I need to insert a pause between the star code and the phone number is there a way to do this)?
- Posts: 6388
- Joined: Mon Nov 08, 2010 4:41 pm
I don't know if this will help but:
Go to https://my.ooma.com/privacy
and look at the text at the right side which is also below:
Caller-ID for outgoing calls can be configured to be blocked by default (dial *82 to enable per-call) or to be shown by default (dial *67 to block per-call).
If you choose to show your caller-id, select which number should be shown (if you have multiple phone numbers).
- Posts: 9337
- Joined: Sun Mar 14, 2010 7:37 pm
- Location: Greater Seattle
ggmpd, you can block your outgoing callerid by default and then unblock on per call basis or show by default and choose to block on per call basis. You can add these relevant dialing prefixes (to block, to unblock) in your contacts. No pause needed (don't think there is a way to add pause to contacts phone entry).
Complete Ooma Star Codes: /viewtopic.php?t=14903
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!