Keeping OpenDNS Filter Settings W/ Ooma

Got something else to discuss that is not covered by the previous forums? Post it here!
Post Reply
Posts: 1
Joined: Sun Nov 25, 2012 11:43 am

Keeping OpenDNS Filter Settings W/ Ooma

Post by makter728 » Sun Nov 25, 2012 11:46 am

Hi guys,

I have a modem->ooma telo->router setup so I can get the best call quality. The problem is that for some reason in this setup, I can't keep my opendns settings. (I have filters that I need.) My router is set to OpenDNS's DNS. Any help? I'm a complete noob at all this stuff. Is there anything I can configure on the hub so that I can continue to use my filters?

User avatar
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle

Re: Keeping OpenDNS Filter Settings W/ Ooma

Post by lbmofo » Sun Nov 25, 2012 3:56 pm

If you can't find the answer, after router setup is fine.

"Optimal Setup" for after Router - viewtopic.php?t=12403
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!


Posts: 19
Joined: Fri Nov 05, 2010 8:18 am

Re: Keeping OpenDNS Filter Settings W/ Ooma

Post by aicitman » Sun Nov 25, 2012 9:04 pm

There is a dns setting in's internet tab, if you do a manual configuration. Did you try?
You'll probably need to set the other information as well, but just copy it from the status page.

Post Reply