Fax issues - Need Help

Got something else to discuss that is not covered by the previous forums? Post it here!
Post Reply
nramaswamy
Posts: 4
Joined: Sun Mar 15, 2009 11:02 am

Fax issues - Need Help

Post by nramaswamy » Sun Mar 15, 2009 11:18 am

Guys / Support

How to I get my fax to work. I have tried it two times and it says transmission error.

1. Can somebody briefly describe the connection configuration?
2. Do I need to dial *99 before I dial 1 + number?

Thanks

murphy
Posts: 7206
Joined: Tue Jan 27, 2009 12:49 pm
Location: Pennsylvania

Re: Fax issues - Need Help

Post by murphy » Sun Mar 15, 2009 1:07 pm

The fax machine needs to be connected to the hub.
You must precede the number with *99.
Set the baud rate to 9600 and turn off error correction.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx

sunrisepostal
Posts: 46
Joined: Tue Jan 13, 2009 1:06 pm

Re: Fax issues - Need Help

Post by sunrisepostal » Mon Mar 16, 2009 6:10 am

Just dial *99 and 10 digit number you don't have to dial 1 front of the number
i use my fax machine as a normal speed and and its work without any problem.

try that you should be fine

nramaswamy
Posts: 4
Joined: Sun Mar 15, 2009 11:02 am

Re: Fax issues - Need Help

Post by nramaswamy » Mon Mar 16, 2009 6:12 am

Thx guys - *99 + fax number did it. Appreciate all the help.

Post Reply