Why did my Ooma logo turn blue?

Problems using My Ooma? Ideas on how we can make it better? You’ve come to the right place.
Post Reply
AStack75
Posts: 8
Joined: Mon Dec 21, 2009 7:27 pm

Why did my Ooma logo turn blue?

Post by AStack75 » Sat Dec 26, 2009 8:19 am

I usually have my Ooma lights turned off on my Ooma Telo. Every once in a while, the logo in the middle will turn blue? Any reason why it does this? Does it mean anything?

User avatar
Mike-o-Matic
Posts: 169
Joined: Wed Nov 18, 2009 7:45 pm

Re: Why did my Ooma logo turn blue?

Post by Mike-o-Matic » Sat Dec 26, 2009 1:35 pm

I don't own a Telo, and this should be considered a COMPLETELY uninformed response until you hear from somebody more confident... but since it's been five hours and nobody in-the-know has replied, I'll take a guess.

If my severely leaky memory serves me, this is your indication that the Telo is having its firmware automatically updated. I *think* I read this previously somewhere on the forum.

I recommend not interrupting it, though, as I also recall it can take quite a while to update. I'm sure more informed persons will reply before long. Hope this helps, though.
Customer Since: November 2009.
Number Port: ordered 12/14/09; completed 01/07/10.
Hardware: one Hub, one Scout, one Telo.
Service Level: Annual Premier.

AStack75
Posts: 8
Joined: Mon Dec 21, 2009 7:27 pm

Re: Why did my Ooma logo turn blue?

Post by AStack75 » Sat Dec 26, 2009 9:36 pm

Thanks Mike.

Post Reply