Telo and Allworx

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
niqhunter
Posts: 3
Joined: Tue Mar 15, 2011 8:37 am

Telo and Allworx

Post by niqhunter » Wed Mar 16, 2011 7:39 am

I have a Telo and an allworx Ip phones system, tech support from ooma said that it would work but they didn't support it. They reccommended that I go to the message boards and see if there is a fix. Now at this point I can recieve incoming calls and they are routed through my allworx 6x to the appropriate extension. Outgoing calls are non existent at this point.

User avatar
lbmofo
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle
Contact:

Re: Telo and Allworx

Post by lbmofo » Wed Mar 16, 2011 8:44 am

I gather you've used this system with your landline before and it worked?

If so, use the unit in a way that treats Ooma's dialtone (phone port) the same as your landline from a walljack (as SouthSound said viewtopic.php?t=11120).

I'd go to my.ooma.com and enable 10 digit dialing.
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!

Image

Post Reply