I started out without a landline connected. I think this was a mistake.
What I want to do, I think, is
1) re-configure the OOMA Hub with a landline connected, and use it for a few days to gain confidence.
2) have the phone number ported to OOMA, and disconnect the land line.
3) use OOMA in a configuration without a landline.
How do I do this?
-- Carl (OOMA customer since yesterday)
Be aware that if you use DSL there is another issue - you need to have the telco "dry loop" your DSL service or when the port completes your DSL will go away too. Again, we can help with information on how to do this.
Additional questions always come up and we're happy to help!
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
Instead, I'll leave the Scout out of the system, run the landline on my internal line1, and use the Hub line for my internal line2.
That should be good enough. It doesn't use the full ooma capability, the that should be a short-term problem.