Something on your mind? Want to give us feedback on something in particular or everything in general? Tell us how we are doing!
#91037 by sail444
Fri Dec 23, 2011 8:31 am
Presently, OOMA has a "forced" call waitting feature which is annying and sometimes does not work right when switching calls back and forth. I understand that OOMA can turn off the call waiting on a permanent basis (not reversible). But then, when the second party calls, all they hear is a continuous ringing. That is NOT GOOD as they will think there is something wrong with the phone system. They should get a busy signal or have the call go directly to OOMA voicemail.

URGENTLY, request a fix to the call waiting "feature" to have the option of turning off the call waiting and have the second caller go directly to voicemail. If that is not possbile, they should get a busy signal (NOT a continuous ringing).

RIght now, I am stuck with the annoying call waiting because, if I have OOMA disable it permantly, the "continuous ringing would not be acceptable.
#91651 by beaverheadriver
Wed Jan 11, 2012 3:24 pm
*70 doesn't really work for incoming calls. The kind when you are talking to your family and the phone is beeping at you.

It would be nice if there was a "Disable call-waiting and send to voice mail" option available.
#92230 by kathychiro
Thu Jan 26, 2012 4:17 pm
I would also like to enable/disable call waiting as part of premier.

I have emailed support and they have offered to PERMANENTLY turn off my call waiting, but if I have Premier, why don't I have a choice to enable/disable for a period of time and not just call by call?
#94495 by lbmofo
Fri Mar 30, 2012 9:57 pm
https://my.ooma.com/system

Where you enable 10-digit dialing, you can disable call-waiting now. If you disable, you will not hear the call waiting beep while on a call (will go to voicemail after your specified number of rings); however, your other handsets (if you have Premier) will ring before going into voicemail.
#97016 by SenorValasco
Mon Jun 18, 2012 7:06 am
Is there anyway to have the person calling get a busy signal if I have call waiting disabled? We still use an answering machine so I have the voicemail set to pick up at 59 seconds...so if someone calls while we're already on the line it just rings and rings.

Who is online

Users browsing this forum: No registered users and 7 guests