Need extra help installing your Ooma Hub or Telo system? Let us know.
#9780 by Skippy
Sat May 16, 2009 6:57 pm
I just installed and activated our Ooma this morning and have a temporary number assigned while my existing number gets ported. So for now (until my phone number gets ported) I have both my existing land-line and the Ooma with the temporary number.

The problem is that I want to use the Ooma but all my calls come in on the existing line. So if I plug my phone into the existing line I get my calls but the Ooma doesn't get used. And if I plug the phone into the Ooma then I miss all of the calls that come in on my existing number over the land-line.

What I want to do is to plug my land-line into the Ooma (as I've done) and have the Ooma ring the phone when a call comes in over my existing land-line. This way I could use the Ooma (and temp number) for outgoing calls but I won't miss any calls on my existing line.

Can this be done? I've searched the forums and haven't been able to find anything but it doesn't seem like it would be all that complicated.

Thanks!
#9781 by WayneDsr
Sat May 16, 2009 7:58 pm
I'm going to assume that you have ooma setup WITHOUT a landline.

If that's the case the best thing you can do is put call forwarding on your land line and have it forward all calls to your ooma number until the port.

If you are using a phone on the ooma hub, as you should and do not have the PHONE port connected to your wall jack, you can receive calls on ooma and landline. Just plug a phone into a wall jack and it should receive all your landline calls. Ooma calls will come through the phone connected to the ooma hub.

And... Welcome to the ooma forums!

Wayne
#9791 by bw1
Sun May 17, 2009 3:50 am
You can also call customer service (CS) and ask to have them change your ooma configuration to be setup with a landline. Then you would connect the wall port on the ooma hub to the wall jack in your house. Explain to CS that you want this configuration temporarily while your number gets ported and you don't want any provisioning of your landline.

This will result in all local, toll free and 911 calls from the phone connected to the ooma hub's phone port to go through the landline and all toll and long distance calls to use ooma.

There are a couple of issues with this setup. First, you have to have the landline connected to the ooma hub or else it will stop working and when the landline is disconnected as part of the port, CS will have to change your ooma configuration to be setup without a landline.
The other issue is that calls coming into your landline will not get the benefits like ooma calls, such as blocking or multi-ring. And if you don't have caller id on your landline, you still won't have it on calls from your landline that go through your ooma hub.
#9797 by jmassimilla
Sun May 17, 2009 6:21 am
First off, it should only take, at most, 48 hours for a feature to be activated. I have a Verizon landline with call forwarding and it is activated by dialing *72. You get a stutter dial tone for a second and then a normal dial tone. At this point, you dial the number that you want to forward to and allow it to connect for @ 6 seconds. The forwarding is then activated. To deactivate, you dial *73. If you dial *72 and get a fast busy signal, you do not have call forwarding on your line. I use my landline for emergencies only and have it forwarded to my ooma number all the time. I've found over the years in dealing with Verizon that their CS reps are not very knowledgable and you can talk to 10 different people and get 10 different answers. They are not very pleasant to deal with for the most part. If you don't already have call forwarding set up on the line, the $5 figure sounds about right. I think I pay about that per month. Good luck with everything and as Wayne said, welcome to ooma. I think that you'll find the experience here rewarding!

Who is online

Users browsing this forum: Google [Bot] and 6 guests