I can access the Ooma Telo Setup page by connecting a network cable from the Ooma device Home port to the wired LAN port of my computer thru http://172.27.35.1, is it possible to access the Ooma Setup pages via 192.168.1.60 instead so I don't have to connect a network cable every time I need to access the Ooma setup page? Thanks
thunderbird wrote:Even using the Home port to access Ooma Setup step can be eliminated by using port forwarding in the Ooma Setup Advanced page, when the Ooma Telo is connected behind the Router. First a static IP address has to be reserved in the router for the Ooma Telo's MAC address. Then click on add new rule in the Ooma Setup Advance page under Port Forwarding. The port that is forwarded is TCP 80, and IP is 172.27.35.1. Than click on Add rule, than click on Update above. Than the static IP address that you assigned to the Ooma Telo in your router, example http://192.186.xxx.xxx is entered your computer browser window, and the Ooma setup pages will open, without any connection to the Ooma Telo Home port.