Need extra help installing your Ooma Hub or Telo system? Let us know.
#83853 by kiachetta
Wed Jun 29, 2011 11:48 am
I followed the instructions. I listened to my "welcome to Ooma" voice mail.

But I can't call anyone. When I pick up my phone, I hear a couple of musical tones, then a soft dial tone kind of sound. I dial a number. Then I hear what may be a dial tone, maybe a busy signal -- every time. When I use my land line, no problem.

I see from some posts here that it's ok if all the blue lights are lit. So what is wrong? I've checked all my connections, restarted the router . . . Please help. Thanks.
#83866 by kiachetta
Wed Jun 29, 2011 4:50 pm
Yes, I did that. No change.

Are all the blue lights really supposed to be on? The quick start guide made it sound like only the Ooma icon should be lit.

Also, is it strange to anyone else that I could get my welcome voice mail message even though I can't call anyone?

Thanks again . . .
#83873 by lbmofo
Wed Jun 29, 2011 6:39 pm
In the meantime, one other thing you can try is to power off ooma for at least 20 minutes so that when you power backup, connectivity build up can start from scratch.
#83882 by kiachetta
Thu Jun 30, 2011 9:49 am
Tried repowering . . . no difference.

But I can receive calls, I've discovered . . . so I am connected . . . just can't call out.

I emailed customer support.
#83901 by Bobby B
Thu Jun 30, 2011 3:16 pm
From the logs it appears like no dialed digits are being detected by the Telo. Do you have the phone connected directly to the Telo PHONE port (and not through your home wiring)?

As a test, try having someone place an inbound call to your Telo and pick up the phone. Try pressing digits on your phone and ask the person you're talking to if they hear the DTMF tones on their end.

What happens if you try a different phone or a different phone cable - do you experience the same results?

Who is online

Users browsing this forum: No registered users and 7 guests