This is my opinion, not Ooma's official policy.
Too bad... I have both types of systems (Hub/Scout and Telo), and IMHO the Hub/Scout is better suited to some applications. In addition, I like the ability to vary the sound volume (and light brightness) without having to sequence through the 4-5 steps required on the Telo.ntoy wrote:Hello,
sfhub is correct. We already stopped manufacturing Hubs/Scouts.
We'll continue to support Hubs/Scouts.
I might have missed something, but as I see it, there is no convenient way to segregate the lines with the Telo as can be accomplished with the Hub Scout. For example, in my home application, I have the primary home number on the Hub which is set up at my personal desk. I split the "wall" port connection at the back of the Hub with one line going to a Scout that is adjacent to my Hub, and which is assigned to my second [personal and private] number. Another line from the split "wall" plug is plugged into the wall plug formerly used for my pots line, and as such, which is distributed to two other Scouts in different rooms. A multi station cordless base station (6 units total) is connected at the Hub, and separate cordless base stations (1 with 4 units and the other with a single unit) are connected to the Scouts in these other rooms.
Now, the neat thing about this set up is that so long as I am not using my Ooma private line, two calls (incoming, outgoing, or a combination) can take place at the same time on the primary telephone line so long as the second call uses a phone unit (or a cordless system tied to a base station) that is connected to a different Scout. In know, it sounds a little crazy, but it works.
I don't think I can duplicate my system with the Telo. So, my recommendation would be to develope a satellite station similar to the Scout to enhance the overall usefulness of the Telo system. In the meantime... don't trash the Hub/Scout system.
I've learned a lot here... two months ago I didn't even know how to spell VOIP and now I are one.