Hub stops working - restored with power down

Problems using My Ooma? Ideas on how we can make it better? You’ve come to the right place.
Post Reply
User avatar
Posts: 13
Joined: Fri Jul 31, 2009 8:21 pm
Location: Grand Rapids Michigan

Hub stops working - restored with power down

Post by backforty » Tue May 11, 2010 10:34 am

On a regular basis, say once or twice a month my hub stops working and flashes red. The only way to restore blue is to pull power to the hub and wait several hours. Then after power is restored it runs fine for another few weeks. This has been going on since October of 2009 on a hub that was installed in my equipment room downstream from the linksys router and motorola modem. Any ideas?

User avatar
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle

Re: Hub stops working - restored with power down

Post by lbmofo » Tue May 11, 2010 12:15 pm

Maybe not the same issue but this thread may contain info that would be helpful: viewtopic.php?f=2&t=7799
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!


Post Reply