Need extra help installing your Ooma Hub or Telo system? Let us know.
#50826 by wordpainter
Fri Mar 19, 2010 8:15 am
Installed Telo between modem and router as shown in setup guide. Lost internet connection on computer. Hooked Telo up behind router, again as instructions show. Got internet connection back but Telo won't work. Called support, was advised, after support person confirmed that the Telo was hooked up correctly, to "disable the firewall on the router." Not at all convinced router (Linksys WRT 54G V8) has a firewall. Am about to return Telo for refund but thought, what the heck, give this forum a shot. Any ideas? Anyone?
#50830 by Groundhound
Fri Mar 19, 2010 9:12 am
Do you have the Telo's "to Internet" port connected to one of your router's LAN ports? If so reboot the router and then the Telo.
#50842 by oomadc
Fri Mar 19, 2010 12:57 pm
Ooma suggests users to run this setup:

Modem --> Ooma --> Router

You should also try with:
Modem --> Router --> Ooma
which works perfect for me. Of course, assuming your router has proper settings.
#50880 by wendavid
Sat Mar 20, 2010 5:42 am
whether you are using Telo in front of router or router in front of Telo, the one stand in first should DMZ the one behind it. Both set up worked for me very well.
#50936 by oomadc
Sun Mar 21, 2010 1:07 am
I run my router before the ooma hub and I didn't need to set ooma hub DMZ. My router is Linksys WRT54GL w/ DD-WRT firmware.

Who is online

Users browsing this forum: No registered users and 13 guests