Something on your mind? Want to give us feedback on something in particular or everything in general? Tell us how we are doing!
#41606 by sunnyd
Wed Jan 13, 2010 2:36 am
I have Brink Home security monitoring my home and I wanted to disconnect my land line and use my ooma phone system. I was told by Brinks that they could not monitor my home without them installing some kind of equipment on my computer, which would cost around $300.00. There should be a way to monitor my home with the Ooma system. :idea: Ooma needs to look into a way that home owners can have there home monitor with the ooma phone.

#41641 by bw1
Wed Jan 13, 2010 8:41 am
Some users have been able to use Ooma with their alarm systems.
Search the forum for alarm.
#41673 by joeed2
Wed Jan 13, 2010 11:58 am
Any alarm system that relies on wires to communicate with the central station is a waste of money. Regardless of whether it is a physical phone line, cable internet line, or power company power line. Someone that wants to break in your house will simply cut all those wires on the way in.

The only way to go is with a cellular feature and battery backup. Brinks sells some kind of module to add to your system that calls the central station over cellular, and has a battery backup. That way, cut phone wires, cut cable internet, cut power lines, or power outages will not effect your alarm system.

Call Brinks and ask about that, I'm surprised they didn't offer the cellular option when you called them the first time. Rather than spending $300 to get it to work with the computer/voip/Ooma, it would be better to put that money toward cellular monitoring.
#41680 by murphy
Wed Jan 13, 2010 12:48 pm
#41684 by joeed2
Wed Jan 13, 2010 1:17 pm
Mine is underground also, but it comes above ground right along the outside wall, then into the house.

Is it 100% underground, and comes up into the interior of your home. Most people with underground phone lines have at some point a conduit that runs up from the ground, into a box mounted on the outside wall, then into the home. That is the place where they rip it off the outside wall.
#41722 by murphy
Wed Jan 13, 2010 3:42 pm
#41777 by joeed2
Wed Jan 13, 2010 7:31 pm
Nice. I had to do the same kind of thing for my cable TV and internet. Run it underground deep in Schedule 80 PVC, then under and into my garage. Everything is deep underground and unexposed. Mainly because landscaping people kept cutting the cable with shovels and tools. Then it would take 2 or 3 days to get the cable company to come out and fix it.
#45368 by joeed2
Thu Feb 04, 2010 8:05 pm
I believe most alarm systems use RJ31 jacks, and regular POTS telephone jacks are RJ-11. How did you "plug and play" an installation between these two types of jacks? Most people have to rewire the alarm panel to handle the different jacks.
#45402 by DTMF
Fri Feb 05, 2010 6:33 am
My alarm system provider, Hawk Security, couldn't get the alarm to connect to the reporting system through the Ooma. Instead, they connected a $99 adapter that makes the connection via the Internet. Now my monitoring charge is $3/month higher. That's still a tiny fraction of what I was paying AT&T for the POTS line that was connected to it before I switched to Ooma. ;)

Who is online

Users browsing this forum: No registered users and 5 guests