Need extra help installing your Ooma Hub or Telo system? Let us know.
#39736 by df5768
Fri Jan 01, 2010 3:28 pm
I have just installed the telo, I did not port my number and I do not have an integrated land line.
When I recieve a call I only see NO DATA there is no caller id information displayed. If I log in to my ooma and look at the call log I correctly see the callers bu the phone is not displaying the caller id information
#39740 by Potts
Fri Jan 01, 2010 3:44 pm
This is normal. In most cases it takes a few days. I assume you are using an assigned No# for Ooma.
#39742 by southsound
Fri Jan 01, 2010 4:05 pm
Actually, I have NOT found that there is a delay in receiving incoming CID information. What kind of telephone are you using with the Telo and is it connected diretly to the phone port or through your home wiring? Do you also have the Telo handset and if so is it displaying correctly?
#39749 by df5768
Fri Jan 01, 2010 4:23 pm
I have a DECT 6.0 from GE cordless phone. The base is plugged into the Phone port on the telo. Now granted this is not the newest phone, it actually some years old when the DECT 6.0 technology was pretty new.
Nothing is plugged into the Home port.
The telo is setup behind the router and the "To Internet" port on the telo is plugged into port 1 on my router
#39750 by df5768
Fri Jan 01, 2010 4:25 pm
Also I do not have a telo handset and my number is a number given to me by ooma.
#39759 by southsound
Fri Jan 01, 2010 5:45 pm
#39762 by amoney
Fri Jan 01, 2010 6:28 pm
I dont entirely know the back end of how Ooma has its arrangments with other vendors but the little that I am beging to pick up indicates that the numbers we receive are from others carriers and that sometimes things are not configured correctly so Ooma may need to contact them inorder to be resolved.

Think of Ooma as a reseller. And when there is a issue, the 3rd party reseller ultimately contacts the Telco that actually controlls the number etc. This is a over simplification. The telco infrastructure is very complex, think of it as alot of middle men.

The delay that was mentioned earlier is the configuration of the caller id to work correctly (the party controlling the number has to configure this, and may take a day or two etc) nothing to do with your equipment. I remember before I got Caller ID on my landline, it said NO DATA also.

But taking no chances call customer support to get someone to look into the matter.

Now the call logs in MYOOMA I can not explain.
#39766 by southsound
Fri Jan 01, 2010 6:52 pm
#39772 by df5768
Fri Jan 01, 2010 7:33 pm
Okay so I've tried the following with no luck:
1)rebooted the telo and called from my cell phone. Still shows No Data
2)unplugged cordless GE phone and connected a corded phone with caller id, called from my cell phone. No information was displayed on the phone at all.
3)Checked call log again and all calls showed correct information

My next step will be to call tech support. I will post updates after I speak with tech support.
#39775 by southsound
Fri Jan 01, 2010 7:43 pm
Thanks for the report, df5768. You have done all I can think of. Maybe support can work some wonders in making it work.

Who is online

Users browsing this forum: No registered users and 9 guests