Need extra help installing your Ooma Hub or Telo system? Let us know.
#21236 by bbtimes3
Tue Sep 22, 2009 6:50 pm
I am porting from ATT CallVantage to ooma. I am attempting to install ooma in this configuration: modem -> router -> CallVantage DLink -> ooma hub. I can receive calls in this configuration but I am unable to make outgoing calls. This config will just be temporary until my existing CallVantage number is ported to ooma. Is this going to work or do I have to move either the DLink or the ooma hub?
#21242 by bbtimes3
Tue Sep 22, 2009 7:01 pm
The DLink device is the CallVantage VOIP router. ATT recommends installing it before the router but it works fine behind it as well. I'll be replacing it as soon as my number gets ported over, so I'm hoping to be able to connect ooma behind the DLink and not have to change anything else.
#21251 by bbtimes3
Tue Sep 22, 2009 7:24 pm
Thanks for the reply, but I don't think I can connect it parallel with the DLink at this time. I can't get a temporary ooma number assigned in my area, so I have to keep the CallVantage number until it gets ported over. I was hoping to route my calls from the DLink through ooma, then when the number was ported I would just remove the DLink. I might try reordering the devices to see if that helps.

Who is online

Users browsing this forum: No registered users and 11 guests