Denied Ports

Got something else to discuss that is not covered by the previous forums? Post it here!
Post Reply
daewon
Posts: 35
Joined: Thu Nov 08, 2012 12:28 pm

Denied Ports

Post by daewon » Mon Nov 19, 2012 1:39 am

In ooma setup i did a basic port scan and it came back with a long list of ports that were closed ...

Code: Select all

Denied Ports :	 TCP 443, UDP 53, UDP 123, UDP 514, UDP 1194, UDP 3386, UDP 3480, UDP 10000, UDP 10500, UDP 11000, UDP 11500, UDP 12000, UDP 12500, UDP 13000, UDP 13500, UDP 14000, UDP 14500, UDP 15000, UDP 15500, UDP 16000, UDP 16500, UDP 17000, UDP 17500, UDP 18000, UDP 18500, UDP 19000, UDP 19500, UDP 20000
do all of those need to be open?

thunderbird
Posts: 6388
Joined: Mon Nov 08, 2010 4:41 pm

Re: Denied Ports

Post by thunderbird » Mon Nov 19, 2012 5:39 am

daewon:
If your Ooma Telo is functioning properly, don't do anything. Most of the ports shown blocked will have alternate paths for Ooma Telo normal use.

daewon
Posts: 35
Joined: Thu Nov 08, 2012 12:28 pm

Re: Denied Ports

Post by daewon » Mon Nov 19, 2012 12:34 pm

Yes it works just fine which is why i was wondering about it. Thanks for replying :-)

Post Reply