Got something else to discuss that is not covered by the previous forums? Post it here!
#92002 by AzJazz
Thu Jan 19, 2012 11:05 pm
Will Ooma ever offer a Class 1 adapter for the Ooma Telo base station?

One of the most annoying problems I have with the current Bluetooth adapter is that I can't go much farther than 10 feet from the base station before the phone signal starts getting too much static to be usable.

A Class 1 adapter will allow distances of up to 100 meters (300 feet), which should allow me to use my headset throughout my house (my headset is a Class 1 device - you need a Class 1 at each end).

They don't have to be much bigger than the current adapters. For example: http://www.amazon.com/Azio-BTD-V201-Micro-Bluetooth-Adapter/dp/B003765X38/ref=sr_1_1?s=electronics&ie=UTF8&qid=1327042148&sr=1-1

Please? Pretty please?
#92004 by thunderbird
Fri Jan 20, 2012 4:59 am
AzJazz wrote:Will Ooma ever offer a Class 1 adapter for the Ooma Telo base station?

One of the most annoying problems I have with the current Bluetooth adapter is that I can't go much farther than 10 feet from the base station before the phone signal starts getting too much static to be usable.

A Class 1 adapter will allow distances of up to 100 meters (300 feet), which should allow me to use my headset throughout my house (my headset is a Class 1 device - you need a Class 1 at each end).

They don't have to be much bigger than the current adapters. For example: http://www.amazon.com/Azio-BTD-V201-Micro-Bluetooth-Adapter/dp/B003765X38/ref=sr_1_1?s=electronics&ie=UTF8&qid=1327042148&sr=1-1

Please? Pretty please?

Purchase a 120 volt powered USB Hub and install it in the Ooma Telo USB port. Install the Ooma USB dongle in the Powered USB Hub. This suggestion may not do what you want it to do, but it helped me.

Who is online

Users browsing this forum: No registered users and 9 guests