Anyway, the adapter paired with the Streamer just fine (follow Ooma instructions on how to pair via using computer connected via network cable directly to hub and accessing the Bluetooth settings at the hub). Connecting is quick and easy.
Now, when I want to place a call, I use the Telo handset, prepend the outbound number with *15 (this puts the Telo in Bluetooth broadcast mode) and hit the green "call" button. Immediately, the handeset/Streamer briefly ring as if a call's coming in but it's a short ring and the Streamer indicates with the "call" button flashing. I press the "call" button on the Streamer and viola! I've switched to my hearing aids for full wireless call-out. I can then set the Telo handset down anywhere I want and go 100% hands free in both ears (and....as you Streamer users know, by your choice with or without hearing anything else in the room). The call rings through, I talk and when I'm done, I hang up the call by pressing the "call" button on the Streamer. Incoming calls work pretty much the same way as using the Streamer with the cell phone.
Range, however, is an issue. Fortunately, I was able to employ 13' of USB extension cable to position the Ooma's Bluetooth adapter in the hallway of my house, which is a central location. Now, anywhere in the house, I am 100% hands-free and I don't have to tote any phone with me. And, because I have a Sprint Airave, my cell phone calls can still go straight to my hearing aids via Bluetooth when I'm not engaged with a call through Ooma. Best of both worlds!
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.