My Ooma flashes red and needs to be reset.

Problems using My Ooma? Ideas on how we can make it better? You’ve come to the right place.
Post Reply
Posts: 1
Joined: Thu Dec 24, 2009 4:04 pm

My Ooma flashes red and needs to be reset.

Post by aerorider1100 » Thu Dec 24, 2009 4:09 pm

I recently purchsed my Ooma and installed it and seems to work fine. YesterdayI was surfing the internet and got disconnected and saw my Ooma flashing red. Pulled the power and let stand for 10 seconds and darn thing reset and worked for 24 hours. Surfing today and it did it again. Removed the power again reset the thinkg. I am wordering what is going on or do I have a bad one?
Thanks to the group for your help.

User avatar
Posts: 3519
Joined: Fri Feb 06, 2009 11:31 am
Location: Harstine Island, WA

Re: My Ooma flashes red and needs to be reset.

Post by southsound » Thu Dec 24, 2009 5:00 pm

Try accessing the ooma setup screen at - or if that doesn't work, use the IP address On the network settings page, select to use the built-in MAC address. This usually takes care of the problem.
ooma customer since February 2009
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.

Post Reply