Maybe a happy medium between all lights on and all off?

Something on your mind? Want to give us feedback on something in particular or everything in general? Tell us how we are doing!
Post Reply
RealDave
Posts: 23
Joined: Fri Oct 16, 2009 4:46 pm

Maybe a happy medium between all lights on and all off?

Post by RealDave » Sun Oct 18, 2009 5:13 pm

I like having the option to turn off the "disco" look but if all of the lights are completely off then how can I tell if it is on/plugged in/working?

Maybe leave a single low intensity LED on when the rest of the LEDs are off?

Quicksprj
Posts: 200
Joined: Mon Jul 27, 2009 4:19 pm
Location: Near Colorado Springs

Re: Maybe a happy medium between all lights on and all off?

Post by Quicksprj » Sun Oct 18, 2009 5:56 pm

If you have a new telo not the old hub/scout then I just wanted to let you know they disabled the dimmer lights for now because the middle settings were causing too much electronic noise. I think they do plan on a fix for this just don't know when.

RealDave
Posts: 23
Joined: Fri Oct 16, 2009 4:46 pm

Re: Maybe a happy medium between all lights on and all off?

Post by RealDave » Sun Oct 18, 2009 9:41 pm

Quicksprj wrote:If you have a new telo not the old hub/scout then I just wanted to let you know they disabled the dimmer lights for now because the middle settings were causing too much electronic noise. I think they do plan on a fix for this just don't know when.
Having one dimmed would be great, but I'd settle just for a single light to let me know that it was plugged in and working.

User avatar
jmassimilla
Posts: 525
Joined: Sat Feb 07, 2009 4:38 am
Location: Burlington County, South Jersey

Re: Maybe a happy medium between all lights on and all off?

Post by jmassimilla » Mon Oct 19, 2009 2:46 am

How about the LEDs on the back? They put on a pretty good light show.
Customer since Feb 2009
2 Hub/Scout
1 Telo/Handset
Lifetime Premier Subscriber

Post Reply