Optimum Installation Settings

Need extra help installing your Ooma Hub or Telo system? Let us know.
User avatar
lbmofo
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle
Contact:

Re: Optimum Installation Settings

Post by lbmofo » Fri Sep 20, 2013 7:17 am

Jstone wrote:I have a new Telo and have it connected wirelessly using a Netgear WNCE2001 adapter. Every day at some point the Ooma logo flashes red. No power outages, nothing like that. Incoming calls hear ringing as if it works ok, then go to voicemail. The phones, of course, do not ring. Cannot make an outgoing call. The flashing continues until I unplug the power, wait, and plug it back in. If I'm away from home there is no way to call anyone at home if this is happening.
Any suggestions? The lower tech the better!
Thanks in advance.
Telo losing connection often.....your router maybe to blame. I had similar "loss of connection" issue via the wifi adapter. I had to reboot the router each time. Rebooting the Telo didn't help. Tried many things on the router to make it more stable (to keep the Ooma wifi adapter from disconnecting). Later, I found out it was my router and not the Ooma wifi adapter causing problems. /viewtopic.php?f=2&t=15121&start=20#p111995
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!

Image

Post Reply