Ooma Hub set up and QoS

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
newooma
Posts: 6
Joined: Mon Aug 09, 2010 10:57 pm

Ooma Hub set up and QoS

Post by newooma » Sun Aug 22, 2010 3:49 pm

My current set up of Ooma Hub is:

Modem sits in my master bedroom closet where there is a panel for the whole house wirings. The modem only has 1 ethernet out jack, which I connect to the cable in the panel that goes to my family room ethernet jack. In my family room, I connect the Ooma hub MODEM jack directly to the wall ethernet jack, then the HOME jack on the Hub to my wireless router. Is this considered the configuration of "ooma directly behind modem"? The only difference I can imagine is that the ooma hub is connect to the modem through my house wiring, not directly by a cable. But the house wiring should still be considered a "long cable", right? Will my setup be good in terms of getting good QoS?

Thanks

Groundhound
Posts: 2711
Joined: Sat May 23, 2009 9:28 am
Location: Atlanta, GA

Re: Ooma Hub set up and QoS

Post by Groundhound » Sun Aug 22, 2010 4:10 pm

See my reply here: http://www.ooma.com/forums/viewtopic.ph ... 012#p62862. Please don't double post, as it makes it difficult for those who wish to help you to know what and where previous responses have been made.

Post Reply