QOS Settings?

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
Scorcher2
Posts: 1
Joined: Sat Jun 12, 2010 4:49 pm

QOS Settings?

Post by Scorcher2 » Sat Jun 12, 2010 4:52 pm

Greetings!

I have my ooma unit set up behind an Actiontec GT724WTG unit. I noticed you can set the QOS in the Modem/Router unit as well as the ooma setup. Do I use the same settings in both units or just one of them. Any advice you can give would be appreciated.

Thanks

Groundhound
Posts: 2711
Joined: Sat May 23, 2009 9:28 am
Location: Atlanta, GA

Re: QOS Settings?

Post by Groundhound » Sat Jun 12, 2010 5:20 pm

Scorcher2 wrote:Greetings!

I have my ooma unit set up behind an Actiontec GT724WTG unit. I noticed you can set the QOS in the Modem/Router unit as well as the ooma setup. Do I use the same settings in both units or just one of them. Any advice you can give would be appreciated.
Usually if the Ooma unit is behind the router you only set QoS in the router. QoS in the Ooma only prioritizes traffic through Ooma's home network port, and with Ooma behind the router you typically have nothing connected to the home network port except when you are accessing Ooma's setup.

Post Reply