Just to be safe - Interface disconnect question.

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
Posts: 1
Joined: Sat Mar 09, 2013 10:52 am

Just to be safe - Interface disconnect question.

Post by kosoku » Sat Mar 09, 2013 10:58 am

Telephone Interface Box
IMG_2337.jpg (230.39 KiB) Viewed 1175 times
Please see attached photo. This is my box before I did anything. There's a clear plug with a blue & white wire going into it - looks like this is what goes to the house. If I take that clear plug out, I'm good to then plug the ooma directly into the wall, right? Just tape it up and leave a note for the telephone company, yeah?

User avatar
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle

Re: Just to be safe - Interface disconnect question.

Post by lbmofo » Sat Mar 09, 2013 11:11 am

If you open the clear plastic swing door, you'd see wires connected to one of the tabs, unseat the tab (by pushing up?) and the wires would come off if you just pull on the wires. You should be done.
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!


Post Reply