Whole House Wiring

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
greened3
Posts: 37
Joined: Thu Aug 04, 2011 9:21 pm

Whole House Wiring

Post by greened3 » Mon Nov 14, 2011 6:04 am

I want to connect my Telo to the house wiring. Do I need to do anything besides disconnecting the modular plugs inside the NIB?
IMG_0414.JPG
IMG_0414.JPG (206.38 KiB) Viewed 1943 times

thunderbird
Posts: 6388
Joined: Mon Nov 08, 2010 4:41 pm

Re: Whole House Wiring

Post by thunderbird » Mon Nov 14, 2011 7:55 am

greened3 wrote:I want to connect my Telo to the house wiring. Do I need to do anything besides disconnecting the modular plugs inside the NIB?
IMG_0414.JPG
Disconnect the modular plugs inside the NIB and tag them, "Do not connect".
Route a phone cord from the Phone port on the back of the Ooma Telo to a House Wall jack. If you want to use a phone near the Ooma Telo, use a phone line splitter to feed both the House wall jack and the phone. If your Ooma Telo has a Phone Wall port, don't use it. Check for Ooma dial tone thoughout the house.

greened3
Posts: 37
Joined: Thu Aug 04, 2011 9:21 pm

Re: Whole House Wiring

Post by greened3 » Mon Nov 14, 2011 8:22 am

Thanks very much for the quick reply.

Post Reply