ooma hub goes dead during start up

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
rcosyn
Posts: 2
Joined: Thu Aug 11, 2011 5:58 pm

ooma hub goes dead during start up

Post by rcosyn » Thu Aug 11, 2011 6:03 pm

I just moved the ooma port and cannot get the hub to activate. When I bring power to the hub, the red light on the tab flashes as does the number pad. After about 20 seconds there is a click and the hub goes silent, with no lights on. What is the problem, it worked this morning. :cry:

thunderbird
Posts: 6388
Joined: Mon Nov 08, 2010 4:41 pm

Re: ooma hub goes dead during start up

Post by thunderbird » Thu Aug 11, 2011 6:37 pm

rcosyn wrote:I just moved the ooma port and cannot get the hub to activate. When I bring power to the hub, the red light on the tab flashes as does the number pad. After about 20 seconds there is a click and the hub goes silent, with no lights on. What is the problem, it worked this morning. :cry:
You've checked all of the connections and cables for proper connections, etc.?

I recall someone saying that the buttons on the Hub sometimes sticks. Check the buttons to see if one is stuck.

rcosyn
Posts: 2
Joined: Thu Aug 11, 2011 5:58 pm

Re: ooma hub goes dead during start up

Post by rcosyn » Thu Aug 11, 2011 6:45 pm

False alarm, just because the red lights come on during start up does not mean the dimmer is not on. :D

Post Reply