Help setup: home distribution

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
72and86
Posts: 1
Joined: Wed Jun 22, 2011 3:33 pm

Help setup: home distribution

Post by 72and86 » Wed Jun 22, 2011 3:49 pm

I've only got DSL from At&T now, Ive dropped the voice line. I have DSL web and Ooma is hooked up to my 2Wire Gateway Modem/Router.
All ooma lights are steady and blue, and a wired phone attached to the back gives me a dial tone and seems to recieve calls too. Now I want to hook up the rest of the house.
The wall near the DSL Modem?Router has ONE connect jack. Now how do I feed my whole house ooma? (The diagram to feed the whole house I've seen, doesnt account for the fact the wall jack phone cord provides the DSL signal to the modem/router with DSL.)
Broadband link details:
Details
DSL Connection Details
DSL Line (Wire Pair): Line 1 (inner pair)
Protocol: G.DMT Annex A
Downstream Rate: 3008 kbps
Upstream Rate: 512 kbps
Channel: Fast

Help appreciated to feed the whole house oooma...
Steve

User avatar
lbmofo
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle
Contact:

Re: Help setup: home distribution

Post by lbmofo » Wed Jun 22, 2011 3:58 pm

Welcome to Ooma.

Since most homes' walljacks are wired with 2 pairs, I think the simplest is to get your DSL in the house via L2 at the NIB.
That way, you just need to worry about accessing L2 where your DSL modem is and all the rest of the house's L1 is available for your Ooma dialtone.

Take a look at this post to see if you can get the info needed: viewtopic.php?t=10261#p70916

Otherwise, let us know.
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!

Image

Post Reply