Configure Ooma Hub behind Dlink DI-624 router with FW 2.76

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
escondido
Posts: 3
Joined: Tue Mar 15, 2011 2:56 pm

Configure Ooma Hub behind Dlink DI-624 router with FW 2.76

Post by escondido » Tue Mar 15, 2011 3:06 pm

Hello,

I am trying to configure the Ooma Hub behind the Dlink DI-624 router. The FW on the router is 2.76 (the latest and the last firmware update).

My configuration that I like to have is cable/DSL modem -> Dlink DI-624 router -> Ooma hub.

Can someone please devise a step-by-step of how to setup the Ooma Hub behind the router?

Will this router be suitable for Ooma VOIP? I am not sure that if the router has QoS for VOIP or not.

Thanks,

E.

User avatar
lbmofo
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle
Contact:

Re: Configure Ooma Hub behind Dlink DI-624 router with FW 2.76

Post by lbmofo » Tue Mar 15, 2011 3:20 pm

Activate your ooma on ooma.com and then plug your Ooma into one of your router's ports, turn on ooma.
Customer Since: 3/13/10
Hardware: Telo & Hub
Service: Premier 12/06/10
Verizon Port: 3/15/10 - 4/02/10
Internet: 100 Mbps/10 Mbps
Setup: SB6141/R6700/Ooma
MainStreetSHARES Ebates: get Ca$h Back when you shop online!!

Image

User avatar
nn5i
Posts: 554
Joined: Fri Jun 11, 2010 2:02 pm
Location: Portland, OR

Re: Configure Ooma Hub behind Dlink DI-624 router with FW 2.76

Post by nn5i » Thu Mar 17, 2011 8:24 am

It ought to work fine if you merely plug it in and do nothing else.

Post Reply