2.18.x
|
|
| VAPI API Reference Documentation 2.18.x |
|
#include <vapi.h>
TDM bus parameters
0: LSB is received first 1: MSB is received first
Range: 0 only for 1-bus-mode 0-1 for 2-bus-mode 0-3 for 4-bus-mode
0: MFS is sampled on falling edge of TDM_CK 1: MFS is sampled on rising edge of TDM_CK
0: TDM_FS is not inverted (active-high) 1: TDM_FS is inverted (active-low)
0: Data is received on the falling edge of TDM_CK 1: Data is received on the rising edge of TDM_CK
0: One data bit is received per TDM_CK period 1: One data bit is received every two TDM_CK periods
0: Data is not inverted (active-high) 1: Data is inverted (active-low)
0: Data is received on the falling edge of TDM_CK 1: Data is received on the rising edge of TDM_CK
0: One data bit is received per TDM_CK period 1: One data bit is received every two TDM_CK periods
0: LSB is transmitted first 1: MSB is transmitted first
0: Data is not inverted (active-high) 1: Data is inverted (active-low)
# time slots between 2 consecutive TDM_FS
Number of Cycles Delay, Receiver
Number of Cycles Delay, Transmitter