diff -Naur dbus-glib-0.108-orig/configure.ac.orig dbus-glib-0.108-new/configure.ac.orig
--- dbus-glib-0.108-orig/configure.ac.orig	2017-05-24 13:29:21.024372000 -0700
+++ dbus-glib-0.108-new/configure.ac.orig	1969-12-31 16:00:00.000000000 -0800
@@ -1,339 +0,0 @@
-dnl -*- mode: m4 -*-
-AC_PREREQ(2.52)
-
-AC_INIT([dbus-glib], [0.108],
-  [https://bugs.freedesktop.org/enter_bug.cgi?product=dbus&component=GLib])
-
-AC_CANONICAL_HOST
-
-AM_INIT_AUTOMAKE([1.9 subdir-objects])
-
-AC_CONFIG_HEADERS(config.h)
-
-# Honor aclocal flags
-ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
-AC_CONFIG_MACRO_DIR(m4)
-
- ## must come before we use the $USE_MAINTAINER_MODE variable later
-AM_MAINTAINER_MODE
-
-m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])
-
-# libtool versioning - this applies to libdbus
-#
-# See http://sources.redhat.com/autobook/autobook/autobook_91.html#SEC91 for details
-#
-
-## increment if the interface has additions, changes, removals.
-LT_CURRENT=5
-
-## increment any time the source changes; set to
-##  0 if you increment CURRENT
-LT_REVISION=3
-
-## increment if any interfaces have been added; set to 0
-## if any interfaces have been changed or removed. removal has
-## precedence over adding, so set to 0 if both happened.
-LT_AGE=3
-
-AC_SUBST(LT_CURRENT)
-AC_SUBST(LT_REVISION)
-AC_SUBST(LT_AGE)
-
-
-AC_PROG_CC
-AC_ISC_POSIX
-AC_HEADER_STDC
-
-AC_ARG_ENABLE(tests, AS_HELP_STRING([--enable-tests],[enable unit test code]),enable_tests=$enableval,enable_tests=$USE_MAINTAINER_MODE)
-AC_ARG_ENABLE(ansi, AS_HELP_STRING([--enable-ansi],[enable -ansi -pedantic gcc flags]),enable_ansi=$enableval,enable_ansi=no)
-AC_ARG_ENABLE(gcov, AS_HELP_STRING([--enable-gcov],[compile with coverage profiling instrumentation (gcc only)]),enable_gcov=$enableval,enable_gcov=no)
-AC_ARG_ENABLE(bash-completion, AS_HELP_STRING([--enable-bash-completion],[install bash completion scripts]),enable_bash_completion=$enableval,enable_bash_completion=yes)
-AC_ARG_WITH(test-socket-dir, AS_HELP_STRING([--with-test-socket-dir=[dirname]],[Where to put sockets for make check]))
-
-
-AC_ARG_WITH(introspect-xml, AS_HELP_STRING([--with-introspect-xml=[filename]],[Pass in a pregenerated dbus daemon introspection xml file (as generated by 'dbus-daemon --introspect') to use instead of querying the installed dbus daemon]))
-
-
-AM_CONDITIONAL(DBUS_BASH_COMPLETION, test x$enable_bash_completion = xyes)
-if test x$enable_bash_completion = xyes; then
-  AC_DEFINE(DBUS_BASH_COMPLETION,1,[Enable bash completion])
-fi
-
-AC_ARG_WITH(dbus-binding-tool,
-  AS_HELP_STRING([--with-dbus-binding-tool=[filename]],[Use external dbus-binding-tool program]),
-  [DBUS_BINDING_TOOL=$withval],[DBUS_BINDING_TOOL=\$\(top_builddir\)/dbus/dbus-binding-tool])
-AC_SUBST(DBUS_BINDING_TOOL)
-
-
-dnl DBUS_BUILD_TESTS controls unit tests built in to .c files 
-dnl and also some stuff in the test/ subdir
-AM_CONDITIONAL(DBUS_BUILD_TESTS, test x$enable_tests = xyes)
-if test x$enable_tests = xyes; then
-    AC_DEFINE(DBUS_BUILD_TESTS,1,[Build test code])
-fi
-
-AC_ARG_ENABLE([asserts],
-  [AS_HELP_STRING([--enable-asserts], [include assertion checks])],
-  [enable_asserts=$enableval], [enable_asserts=$USE_MAINTAINER_MODE])
-if test x$enable_asserts = xno; then
-    AC_DEFINE([G_DISABLE_ASSERT], [1], [Disable GLib assertion macros])
-fi
-
-AC_ARG_ENABLE([checks],
-  [AS_HELP_STRING([--enable-checks], [include sanity checks on public API])],
-  [enable_checks=$enableval], [enable_checks=yes])
-if test x$enable_checks = xno; then
-    AC_DEFINE([G_DISABLE_CHECKS], [1], [Disable GLib public API sanity checking])
-fi
-
-#### gcc warning flags
-
-AC_DEFUN([AC_CC_TRY_FLAG], [
-  AC_MSG_CHECKING([whether gcc understands $1])
-
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $1"
-
-  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])], [ac_cc_flag=yes], [ac_cc_flag=no])
-  CFLAGS="$ac_save_CFLAGS"
-
-  if test "x$ac_cc_flag" = "xyes"; then
-    ifelse([$2], , :, [$2])
-  else
-    ifelse([$3], , :, [$3])
-  fi
-  AC_MSG_RESULT([$ac_cc_flag])
-])
-
-if test "x$GCC" = "xyes"; then
-  AC_CC_TRY_FLAG([-Wfloat-equal],
-                 [ac_flag_float_equal=yes],
-                 [ac_flag_float_equal=no])
-
-  changequote(,)dnl
-  case " $CFLAGS " in
-  *[\ \	]-Wall[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wall" ;;
-  esac
-
-  case " $CFLAGS " in
-  *[\ \	]-Wchar-subscripts[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wchar-subscripts" ;;
-  esac
-
-  case " $CFLAGS " in
-  *[\ \	]-Wmissing-declarations[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wmissing-declarations" ;;
-  esac
-
-  case " $CFLAGS " in
-  *[\ \	]-Wmissing-prototypes[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wmissing-prototypes" ;;
-  esac
-
-  case " $CFLAGS " in
-  *[\ \	]-Wnested-externs[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wnested-externs" ;;
-  esac
-
-  case " $CFLAGS " in
-  *[\ \	]-Wpointer-arith[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wpointer-arith" ;;
-  esac
-
-  case " $CFLAGS " in
-  *[\ \	]-Wcast-align[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wcast-align" ;;
-  esac
-
-  if test "x$ac_flag_float_equal" = "xyes"; then
-    case " $CFLAGS " in
-    *[\ \	]-Wfloat-equal[\ \	]*) ;;
-    *) CFLAGS="$CFLAGS -Wfloat-equal" ;;
-    esac
-  fi
-
-  case " $CFLAGS " in
-  *[\ \	]-Wsign-compare[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -Wsign-compare" ;;
-  esac
-  
-  # This one is special - it's not a warning override.
-  # http://bugs.freedesktop.org/show_bug.cgi?id=10599
-  # is the bug for DBus core.
-  case " $CFLAGS " in
-  *[\ \	]-fno-strict-aliasing[\ \	]*) ;;
-  *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;;
-  esac  
-
-  if test "x$enable_ansi" = "xyes"; then
-    case " $CFLAGS " in
-    *[\ \	]-ansi[\ \	]*) ;;
-    *) CFLAGS="$CFLAGS -ansi" ;;
-    esac
-
-    case " $CFLAGS " in
-    *[\ \	]-D_POSIX_C_SOURCE*) ;;
-    *) CFLAGS="$CFLAGS -D_POSIX_C_SOURCE=199309L" ;;
-    esac
-
-    case " $CFLAGS " in
-    *[\ \	]-D_BSD_SOURCE[\ \	]*) ;;
-    *) CFLAGS="$CFLAGS -D_BSD_SOURCE" ;;
-    esac
-
-    case " $CFLAGS " in
-    *[\ \	]-pedantic[\ \	]*) ;;
-    *) CFLAGS="$CFLAGS -pedantic" ;;
-    esac
-  fi
-  if test x$enable_gcov = xyes; then
-    case " $CFLAGS " in
-    *[\ \	]-fprofile-arcs[\ \	]*) ;;
-    *) CFLAGS="$CFLAGS -fprofile-arcs" ;;
-    esac
-    case " $CFLAGS " in
-    *[\ \	]-ftest-coverage[\ \	]*) ;;
-    *) CFLAGS="$CFLAGS -ftest-coverage" ;;
-    esac
-
-    ## remove optimization
-    CFLAGS=`echo "$CFLAGS" | sed -e 's/-O[0-9]*//g'`
-  fi
-  changequote([,])dnl
-else
-  if test x$enable_gcov = xyes; then
-    AC_MSG_ERROR([--enable-gcov can only be used with gcc])
-  fi
-fi
-
-LT_INIT
-
-changequote(,)dnl
-# compress spaces in flags
-CFLAGS=`echo "$CFLAGS" | sed -e 's/ +/ /g'`
-CPPFLAGS=`echo "$CPPFLAGS" | sed -e 's/ +/ /g'`
-changequote([,])dnl
-
-if test x$enable_gcov = xyes; then
-     # so that config.h changes when you toggle gcov support
-     AC_DEFINE_UNQUOTED([DBUS_GCOV_ENABLED],
-       [__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__],
-       [Defined to the gcc version if gcov is enabled, to force a rebuild due to config.h changing])
-fi
-
-#### Various functions
-AC_SEARCH_LIBS([socket], [socket])
-
-dnl check for socklen_t
-AC_MSG_CHECKING(whether socklen_t is defined)
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-]],[[
-socklen_t foo;
-foo = 1;
-]])],dbus_have_socklen_t=yes,dbus_have_socklen_t=no)
-AC_MSG_RESULT($dbus_have_socklen_t)
-
-if test "x$dbus_have_socklen_t" = "xyes"; then
-    AC_DEFINE(HAVE_SOCKLEN_T,1,[Have socklen_t type])
-fi
-
-#### Sort out XML library
-
-# see what we have
-AC_CHECK_LIB(expat, XML_ParserCreate_MM,
-             [ AC_CHECK_HEADERS(expat.h, have_expat=true, have_expat=false) ],
-             have_expat=false)
-
-if ! $have_expat ; then
-  AC_MSG_ERROR([expat library not found, check config.log for failed attempts])
-fi
-
-XML_LIBS=-lexpat
-XML_CFLAGS=
-
-
-#### Set up final flags
-
-PKG_CHECK_MODULES([DBUS], [dbus-1 >= 1.8])
-AC_SUBST([DBUS_CFLAGS])
-AC_SUBST([DBUS_LIBS])
-
-# Glib detection
-AC_DEFINE([GLIB_VERSION_MAX_ALLOWED], [GLIB_VERSION_2_32],
-  [Warn on use of APIs added after GLib 2.32])
-AC_DEFINE([GLIB_VERSION_MIN_REQUIRED], [GLIB_VERSION_2_32],
-  [Warn on use of APIs deprecated before GLib 2.32])
-PKG_CHECK_MODULES([DBUS_GLIB], [gobject-2.0 >= 2.32, gio-2.0 >= 2.32])
-
-GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
-AC_SUBST(GLIB_GENMARSHAL)
-
-dnl GLib flags
-AC_SUBST(DBUS_GLIB_CFLAGS)
-AC_SUBST(DBUS_GLIB_LIBS)
-AC_SUBST(DBUS_GLIB_THREADS_LIBS)
-
-DBUS_GLIB_TOOL_CFLAGS=$XML_CFLAGS
-DBUS_GLIB_TOOL_LIBS="$XML_LIBS"
-AC_SUBST(DBUS_GLIB_TOOL_CFLAGS)
-AC_SUBST(DBUS_GLIB_TOOL_LIBS)
-
-### gtk-doc Documentation
-GTK_DOC_CHECK([1.14], [--flavour no-tmpl])
-
-AC_CONFIG_FILES([
-Makefile
-m4/Makefile
-dbus/Makefile
-dbus/examples/Makefile
-dbus/examples/statemachine/Makefile
-tools/Makefile
-dbus-glib-1.pc
-dbus-glib-1-uninstalled.pc
-])
-AC_OUTPUT
-
-dnl ==========================================================================
-echo "
-                    D-BUS GLIB BINDINGS $VERSION
-                  ==============
-
-	prefix:                   ${prefix}
-	exec_prefix:              ${exec_prefix}
-	source code location:	  ${srcdir}
-	compiler:		  ${CC}
-	cflags:		          ${CFLAGS}
-	cppflags:		  ${CPPFLAGS}
-"
-
-echo "
-        Maintainer mode:          ${USE_MAINTAINER_MODE}
-        gcc coverage profiling:   ${enable_gcov}
-        Building unit tests:      ${enable_tests}
-        Building assertions:      ${enable_asserts}
-        Building checks:          ${enable_checks}
-        Building Gtk-doc docs:    ${enable_gtk_doc}
-        Bash Completion:          ${enable_bash_completion}
-        Using XML parser:         ${with_xml}
-"
-
-if test x$enable_tests = xyes; then
-        echo "NOTE: building with unit tests increases the size of the installed library and renders it insecure."
-fi
-if test x$enable_tests = xyes -a x$enable_asserts = xno; then
-        echo "NOTE: building with unit tests but without assertions means tests may not properly report failures (this configuration is only useful when doing something like profiling the tests)"
-fi
-if test x$enable_gcov = xyes; then
-        echo "NOTE: building with coverage profiling is definitely for developers only."
-fi
-if test x$enable_asserts = xyes; then
-        echo "NOTE: building with assertions increases library size and decreases performance."
-fi
-if test x$enable_checks = xno; then
-        echo "NOTE: building without checks for arguments passed to public API makes it harder to debug apps using D-BUS, but will slightly decrease D-BUS library size and _very_ slightly improve performance."
-fi
diff -Naur dbus-glib-0.108-orig/dbus/Makefile.am dbus-glib-0.108-new/dbus/Makefile.am
--- dbus-glib-0.108-orig/dbus/Makefile.am	2017-05-24 13:29:21.028370000 -0700
+++ dbus-glib-0.108-new/dbus/Makefile.am	2017-05-24 13:32:01.755408000 -0700
@@ -65,6 +65,9 @@
 
 libdbus_gtool_la_LIBADD = \
 	-lexpat \
+	-lffi \
+	-lz \
+	-lgmodule-2.0 \
 	$(DBUS_LIBS) \
 	$(DBUS_GLIB_LIBS) \
 	libdbus-glib-1.la \
@@ -78,7 +81,7 @@
 	dbus-glib-tool.h			\
 	dbus-glib-tool.c
 
-dbus_binding_tool_LDADD= $(builddir)/libdbus-gtool.la $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS) -lexpat
+dbus_binding_tool_LDADD= $(builddir)/libdbus-gtool.la $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS) -lexpat -lffi -lz -lgmodule-2.0
 
 ## we just rebuilt these manually and check them into cvs; easier than
 ## convincing automake/make to do this properly
@@ -101,7 +104,7 @@
 
 dbus_bash_completion_helper_SOURCES =                 	\
 	dbus-bash-completion-helper.c
-dbus_bash_completion_helper_LDADD=$(builddir)/libdbus-gtool.la -lexpat $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS)
+dbus_bash_completion_helper_LDADD=$(builddir)/libdbus-gtool.la -lexpat -lffi -lz $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS) -lgmodule-2.0
 
 
 EXTRA_DIST=dbus-gmarshal.list dbus-bash-completion.sh.in
diff -Naur dbus-glib-0.108-orig/dbus/Makefile.in dbus-glib-0.108-new/dbus/Makefile.in
--- dbus-glib-0.108-orig/dbus/Makefile.in	2017-05-24 13:29:21.032370000 -0700
+++ dbus-glib-0.108-new/dbus/Makefile.in	2017-05-24 13:36:34.536196000 -0700
@@ -672,6 +672,9 @@
 
 libdbus_gtool_la_LIBADD = \
 	-lexpat \
+	-lffi \
+	-lz \
+	-lgmodule-2.0 \
 	$(DBUS_LIBS) \
 	$(DBUS_GLIB_LIBS) \
 	libdbus-glib-1.la \
@@ -683,13 +686,13 @@
 	dbus-glib-tool.h			\
 	dbus-glib-tool.c
 
-dbus_binding_tool_LDADD = $(builddir)/libdbus-gtool.la $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS) -lexpat
+dbus_binding_tool_LDADD = $(builddir)/libdbus-gtool.la $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS) -lexpat -lffi -lz -lgmodule-2.0
 completiondir = $(sysconfdir)/bash_completion.d
 @DBUS_BASH_COMPLETION_TRUE@completion_SCRIPTS = dbus-bash-completion.sh
 dbus_bash_completion_helper_SOURCES = \
 	dbus-bash-completion-helper.c
 
-dbus_bash_completion_helper_LDADD = $(builddir)/libdbus-gtool.la -lexpat $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS)
+dbus_bash_completion_helper_LDADD = $(builddir)/libdbus-gtool.la -lexpat -lffi -lz $(builddir)/libdbus-glib-1.la $(DBUS_LIBS) $(DBUS_GLIB_LIBS) -lgmodule-2.0
 EXTRA_DIST = dbus-gmarshal.list dbus-bash-completion.sh.in
 @DBUS_BUILD_TESTS_TRUE@TESTS_ENVIRONMENT = DBUS_TEST_DATA=$(top_builddir)/test/data DBUS_TEST_HOMEDIR=$(top_builddir)/dbus
 @DBUS_BUILD_TESTS_TRUE@dbus_glib_test_SOURCES = \
diff -Naur dbus-glib-0.108-orig/Makefile.in.orig dbus-glib-0.108-new/Makefile.in.orig
--- dbus-glib-0.108-orig/Makefile.in.orig	2016-09-09 00:46:46.000000000 -0700
+++ dbus-glib-0.108-new/Makefile.in.orig	1969-12-31 16:00:00.000000000 -0800
@@ -1,997 +0,0 @@
-# Makefile.in generated by automake 1.15 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2014 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Copyright © 2010 Collabora Ltd. <http://www.collabora.co.uk/>
-#
-# Licensed under the Academic Free License version 2.1
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Alternatively, at your option, you can redistribute and/or modify
-# this single file under the terms of the GNU Lesser General Public License
-# as published by the Free Software Foundation; either version 2.1 of
-# that license, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(am__DIST_COMMON)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = test/data/valid-service-files/debug-glib.service \
-	test/data/valid-service-files/debug-echo.service \
-	test/data/valid-service-files/interfaces-test.service \
-	dbus-glib-1.pc dbus-glib-1-uninstalled.pc
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
-DATA = $(pkgconfig_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-	$(LISP)config.h.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(srcdir)/dbus-glib-1-uninstalled.pc.in \
-	$(srcdir)/dbus-glib-1.pc.in $(srcdir)/tools/lcov.am \
-	$(top_srcdir)/test/data/valid-service-files/debug-echo.service.in \
-	$(top_srcdir)/test/data/valid-service-files/debug-glib.service.in \
-	$(top_srcdir)/test/data/valid-service-files/interfaces-test.service.in \
-	AUTHORS COPYING ChangeLog INSTALL NEWS README compile \
-	config.guess config.sub install-sh ltmain.sh missing
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DBUS_BINDING_TOOL = @DBUS_BINDING_TOOL@
-DBUS_CFLAGS = @DBUS_CFLAGS@
-DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@
-DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@
-DBUS_GLIB_THREADS_LIBS = @DBUS_GLIB_THREADS_LIBS@
-DBUS_GLIB_TOOL_CFLAGS = @DBUS_GLIB_TOOL_CFLAGS@
-DBUS_GLIB_TOOL_LIBS = @DBUS_GLIB_TOOL_LIBS@
-DBUS_LIBS = @DBUS_LIBS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GREP = @GREP@
-GTKDOC_CHECK = @GTKDOC_CHECK@
-GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
-GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
-GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
-GTKDOC_MKPDF = @GTKDOC_MKPDF@
-GTKDOC_REBASE = @GTKDOC_REBASE@
-HTML_DIR = @HTML_DIR@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_AGE = @LT_AGE@
-LT_CURRENT = @LT_CURRENT@
-LT_REVISION = @LT_REVISION@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-ACLOCAL_AMFLAGS = -I m4
-GLIB_PC = dbus-glib-1.pc
-SUBDIRS = dbus tools test doc
-DIST_SUBDIRS = dbus tools test doc m4
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = $(GLIB_PC)
-DISTCLEANFILES = \
-	$(GLIB_PC)
-
-EXTRA_DIST = HACKING NEWS dbus-bus-introspect.xml dbus-glib-1.pc.in \
-	ChangeLog
-
-# Creating ChangeLog from git log:
-MAINTAINERCLEANFILES = ChangeLog
-DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc --enable-checks --enable-tests
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/tools/lcov.am $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-$(srcdir)/tools/lcov.am $(am__empty):
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
-	@test -f $@ || rm -f stamp-h1
-	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-test/data/valid-service-files/debug-glib.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/debug-glib.service.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-test/data/valid-service-files/debug-echo.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/debug-echo.service.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-test/data/valid-service-files/interfaces-test.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/interfaces-test.service.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-dbus-glib-1.pc: $(top_builddir)/config.status $(srcdir)/dbus-glib-1.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-dbus-glib-1-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/dbus-glib-1-uninstalled.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool config.lt
-install-pkgconfigDATA: $(pkgconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-	done
-
-uninstall-pkgconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build/sub \
-	  && ../../configure \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=../.. --prefix="$$dc_install_base" \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA) config.h
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-pkgconfigDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-pkgconfigDATA
-
-.MAKE: $(am__recursive_targets) all install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	am--refresh check check-am clean clean-cscope clean-generic \
-	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-pkgconfigDATA \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
-	uninstall-am uninstall-pkgconfigDATA
-
-.PRECIOUS: Makefile
-
-
-ChangeLog:
-$(srcdir)/ChangeLog:
-	@if test -d "$(srcdir)/.git"; then \
-	  (cd "$(srcdir)" && \
-	  ./missing --run git log --stat) | fmt --split-only > $@.tmp \
-	  && mv -f $@.tmp $@ \
-	  || ($(RM) $@.tmp; \
-	      echo Failed to generate ChangeLog, your ChangeLog may be outdated >&2; \
-	      (test -f $@ || echo git-log is required to generate this file >> $@)); \
-	else \
-	  test -f $@ || \
-	  (echo A git checkout and git log are required to generate ChangeLog >&2 && \
-	  echo A git checkout and git-log are required to generate this file >> $@); \
-	fi
-
-%.tar.gz.asc: %.tar.gz
-	$(AM_V_GEN)gpg --detach-sign --armor $@
-
-maintainer-upload-release:
-	test -f @PACKAGE@-@VERSION@.tar.gz
-	test -f @PACKAGE@-@VERSION@.tar.gz.asc
-	gpg --verify @PACKAGE@-@VERSION@.tar.gz.asc
-	rsync -vzP @PACKAGE@-@VERSION@.tar.gz dbus.freedesktop.org:/srv/dbus.freedesktop.org/www/releases/@PACKAGE@/@PACKAGE@-@VERSION@.tar.gz
-	rsync -vzP @PACKAGE@-@VERSION@.tar.gz.asc dbus.freedesktop.org:/srv/dbus.freedesktop.org/www/releases/@PACKAGE@/@PACKAGE@-@VERSION@.tar.gz.asc
-	rsync -rvzPp --chmod=Dg+s,ug+rwX,o=rX doc/reference/html/ \
-	dbus.freedesktop.org:/srv/dbus.freedesktop.org/www/doc/@PACKAGE@/
-
-check-valgrind: all
-	$(MAKE) -C test check-valgrind
-
-lcov-reset:
-	lcov --directory @top_srcdir@ --zerocounters
-
-lcov-report:
-	lcov --directory @top_srcdir@ --capture \
-		--output-file @top_builddir@/lcov.info.tmp
-	lcov --directory @top_srcdir@ --output-file @top_builddir@/lcov.info \
-		--remove @top_builddir@/lcov.info.tmp '*-scan.c'
-	rm @top_builddir@/lcov.info.tmp
-	$(mkdir_p) @top_builddir@/lcov.html
-	git_commit=`GIT_DIR=@top_srcdir@/.git git log -1 --pretty=format:%h 2>/dev/null`;\
-	genhtml --title "@PACKAGE_STRING@ $$git_commit" \
-		--output-directory @top_builddir@/lcov.html lcov.info
-	@echo
-	@echo 'lcov report can be found in:'
-	@echo 'file://@abs_top_builddir@/lcov.html/index.html'
-	@echo
-
-lcov-check:
-	$(MAKE) lcov-reset
-	$(MAKE) check $(LCOV_CHECK_ARGS)
-	$(MAKE) lcov-report
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
